UPS...
...On-Line CP-(S), Standby SB and SBU.

UPS Uninterrupted Power Supplies are designed for the hardware and software protection of various home, office and professional electric powered systems and equipment, against power failure and instability or disturbance(Voltage Fluctuattion, Surge, Sag, Spike..). There are two main categories of UPS the On-Line and the Standby . Each one has its advantages and the right choice for the most suitable protection is depending on the type of application and the budget involved.

On-Line CP - (S) series
are On-Line UPS available in 300 - 600 - 900 - 1200 - 1500 - 2000 and 2500VA with excellent features like : On-Line Stabilization, Continuous Line Filtering, Grant and Expandable Autonomy, Battery Protection against Overchargings - Overdischargings - Frequent Dischargings, Elegant Appearance, Low Profile, Noiseless Operation, High Efficiency, Computer and SNMP Interface port + software, Spike and Noise Protection, CE markings and 2 Year Warranty. They are the professional choise for the most demading applications.
TECHNICAL CHARACTERISTICS CP-300S CP-600S CP-900S CP-1200S CP-1500S CP-2000S CP-2500S
INPUT
Voltage
Frequency
INPUT ....
220 -20 % / +15% VAC
50 Hz
OUTPUT
Voltage RMS
Inverter Frequency
Regulation
Synchronized
Overload
OUTPUT ....
220 +/- 5 % VAC
50 Hz +/- 0,5 %
Continuous, Input-Line Independent
With AC Mains
200 % for 20ms
POWER CAPACITY 300 VA 600 VA 900 VA 1200 VA 1500 VA 2000 VA 2500 VA
BATTERY Maintenance Free Sealed Type
AUTONOMY
with 100 % Load
with 50 % Load

30 min.
50 min.

15 min.
35 min.

10 min.
30 min.

15 min.
35 min.

20 min.
45 min.

12 min.
35 min.

10 min.
25 min.
RECHARGE TIME 3 Hours
4 Hours
6 Hours
PROTECTION
Output
Overvoltage
Battery
Input
Surge
Filtering
TYPE ....
Electronic
Electronic
Overcharge and Overdischarge
Fuse-Link
Suppressors
Output EMI Filters
LED
Line
Back-Up
Battery Low
Alarm
Overload
INDICATING ....
* Normal AC Mains Operation
* AC Mains Voltage Failure or Low, Power is supplied from battery
* Battery is reaching the permissible discharge level...
* Automatic Shutdown of the UPS is imminent due to Abnormal condition
* The Output is Overloaded with equipment of Higher than Nominal UPS Power
SOUND ALARMS
Back-Up
Battery Low
Overload
TYPE OF SOUND ....
Periodic Signal, 2sec
Continuous Signal
Continuous Signal
PROTECTION CLASS IP - 20
COMMUNICATION Interface Port and Software
ENVIRONMENTAL
CONDITION
Operating Temperature : 0 - 40'C, Humidity : 0 - 90% non-condencing
Storage Temperature : -20 to 70'C
All items available in stock. Customized products Upon Request.
Specifications are subject to change or improvement withought prior notice.
.

Standby SB series
are Standby UPS available in 400 and 600VA with excellent features like : Elegant Appearance, Low Profile, Noiseless Operation, Easy to use, Low Cost, Fast Response, High Efficiency, No Moving Parts, Spike and Noise Protection, CE markings and 2 Year Warranty. They are ideal for PCs, Cashier mashines, Weighing machines, Exchange boards, Lotto machines, Laboratory Instruments, Security Systems and other Home - Office Power sensitive equipment.
TECHNICAL CHARACTERISTICS SB - 400 SB - 600
INPUT
Working Voltage
Working Frequency
180 - 263 VAC
50 Hz +/- 10
Nominal Current
Maximum Current
1,7 A
2,6 A
2,2 A
3,3 A
OUTPUT
Voltage RMS
Inverter Frequency
Inverter Waveform
Synchronized
Transfer Time
Power Factor
Overload
230 +/- 1 % VAC
50 Hz +/- 0,1 %
PWM
100 % with AC Mains
2ms typical
0,6 (cosf)
300 % for 200ms, 150 % for 500ms
Nominal Power Capacity 400 VA 600 VA
BATTERIES Maintenance Free Sealed Type
Number of Batteries
Voltage
Capacity
One
12 VDC
7,2 Ah
Autonomy with 100 % Load
Autonomy with 50 % Load

15 min.
37 min.

10 min.
25 min.
90 % Recharge Time 4 Hours
GENERAL
PROTECTION
Output
Battery
Input
Surge
Inverter
Temperature
Other
TYPE ....
Overvoltage and Short-circuit
Overcharge and Overdischarge
Overvoltage
Lightning Suppression
Overload
Overtemperature
Backfeed
LED
Line
Back-Up

Battery Low

Alarm

INDICATING ....
* Normal AC Mains Operation
* AC Mains Voltage Failure or Low, Power is supplied from battery
* Battery is reaching the permissible discharge level
* Automatic Shutdown of the UPS is imminent due to Abnormal condition
SOUND ALARMS
Back-Up
Battery Low
TYPE OF SOUND ....
Periodic Signal, 10sec
Continuous Signal
DESIGNED IN ACCORDANCE WITH EN 50091 - 1
EN 50091 - 2
ACOUSTIC NOISE < 40 dB per 1 m
COMMUNICATION Interface Port and Software
(OPTIONAL)
ENVIRONMENTAL CONDITION Operating Temperature : 0 - 40'C,
Humidity : 0 - 90% non-condencing
Storage Temperature : -20 to 70'C
DIMENTIONS ( Hight x Width x Length ) 225 x 130 x 325 mm
WEIGHT 12 Kgr 13 Kgr
All items available in stock. Customized products Upon Request.
Specifications are subject to change or improvement withought prior notice.

Standby SBU series
are Standby UPS available in 900 - 1200 - 1500 - 2000 and 2500VA with excellent features like : High Efficiency, Elegant Appearance, Low Profile, Noiseless Operation, Grant and Expandable Autonomy, Computer and SNMP Interface port + software, Easy to use, Fast Response, High Power Capacity, High Efficiency, Spike and Noise Protection, No Moving Parts, CE markings and 2 Year Warranty. They are ideal for Computer Networks, PCs and Peripheral Systems Laboratory Instruments, Security Systems and other Professional Power sensitive equipment of higher Power Capacity.
TECHNICAL CHARACTERISTICS SBU-900 SBU-1200 SBU-1500 SBU-2000 SBU-2500
INPUT
Voltage
Frequency
INPUT ....
180 - 263 VAC
50 Hz +/- 10 %
OUTPUT
Voltage RMS
Inverter Frequency
Inverter Waveform
Synchronized
Transfer Time
Overload
OUTPUT ....
230 +/- 1 % VAC
50 Hz +/- 0,1 %
PWM
100 % with AC Mains
2ms typical
300 % for 200ms, 150 % for 500ms
POWER CAPACITY 900 VA 1200 VA 1500 VA 2000 VA 2500 VA
BATTERY Maintenance Free Sealed Type
AUTONOMY
with 100 % Load
with 50 % Load

15 min.
40 min.

10 min.
25 min.

15 min.
40 min.

12 min.
35 min.

10 min.
25 min.
RECHARGE TIME 3 Hours
4 Hours
6 Hours
PROTECTION
Output
Overvoltage
Battery
Input-Output
Surge
Filtering
TYPE ....
Electronic
Electronic
Overcharge and Overdischarge
Fuse-Link
Suppressors
Output EMI Filters
LED
Line
Back-Up
Battery Low
Alarm
Overload
INDICATING ....
* Normal AC Mains Voltage Operation
* AC Mains Voltage Failure or Low - Power is supplied from battery
* Battery is reaching the permissible discharge level...
* Automatic Shutdown of UPS is imminent due to Abnormal condition
* Output is Overloaded with Higher than Nominal UPS Power
SOUND ALARMS
Back-Up
Battery Low
Overload
TYPE OF SOUND ....
Periodic Signal, 2sec
Continuous Signal
Continuous Signal
PROTECTION CLASS IP - 20
COMMUNICATION Interface Port and Software
ENVIRONMENTAL
CONDITION
Operating Temperature : 0 - 40'C, Humidity : 0 - 90% non-condencing
Storage Temperature : -20 to 70'C
All items available in stock. Customized products Upon Request.
Specifications are subject to change or improvement withought prior notice.